Monoprice 9207 IP Camera Converter Manual de usuario

MPEG-4 Video Server Micro SD-Card Recording User Manual Revision: 020308 Date: 2010/06/21 For firmware version v020308

MPEG-4 Video Server Figure 2-3: The installation CD disk Last, Use CamView program to see the video Figure 2-5 is the running window of the CamView

MPEG-4 Video Server of the CamView software for more functions. Seeing the video in a remote location After the video server product is installed an

MPEG-4 Video Server 3. Web configurations You can login into the web configuration page by directly key-in the IP address of the video server product

MPEG-4 Video Server 3.1. Information The first page of the web configuration of the video server product is the information page. You can see the mo

MPEG-4 Video Server 3.2. Video Display This display page allows you to view the video display of the video server product. For the first time use of t

MPEG-4 Video Server 5. Delete preset – delete one of the pre-defined preset points. 6. Patrol settings – press the “patrol” button to edit the patro

MPEG-4 Video Server 3.3. Network The Network page allows you to modify the network settings of the wired Ethernet. The default settings use DHCP to

MPEG-4 Video Server Figure 3-8: Network settings page for fixed IP address 17

MPEG-4 Video Server 3.4. Advanced Network In some special situation, your network environment only provides PPPoE connection(ADSL service), there is

MPEG-4 Video Server 3.5. Video Settings The video server product is designed to provide high quality video for viewing from CamView software. In thi

MPEG-4 Video Server Table of Contents 1. INTRODUCTION...

MPEG-4 Video Server Figure 3-10: Video settings page 20

MPEG-4 Video Server 3.6. 3GPP/RTSP settings The video server product is able to be viewed from a 3G mobile phone, for detailed settings on the 3G mo

MPEG-4 Video Server 3.7. RS485 settings The video server product provides the RS485 interface for speed dome control. The supported protocols are Pe

MPEG-4 Video Server 3.8. Email/ftp Alarm The video server product provides the Email/ftp function, you can enable or schedule the Email/ftp ability

MPEG-4 Video Server be on another email server or any reachable email address. The username and password fields could be left empty if no authenticati

MPEG-4 Video Server 3.9. DI/DO settings The video server product provides DI/DO alarm function, a video motion detection or the digital input signal

MPEG-4 Video Server 3.10. NAS settings The video server provides the recording of the video files into a standard NAS ( Network Access Storage ) dev

MPEG-4 Video Server files on the NAS devices. In the Microsoft Windows environment, you can access to the NAS device by keying the URL address \\”NAS

MPEG-4 Video Server 3.11. SD-Card settings The video server provides the recording of the video files into a standard Micro SD-Card. Since this reco

MPEG-4 Video Server Figure 3-17: SD-Card information page 29

MPEG-4 Video Server APPENDIX E. 3GPP/ISMA OPERATION...49 APPENDIX

MPEG-4 Video Server 3.12. Scheduling The Video server provides the scheduling function for the motion detection triggered email/ftp sending and/or t

MPEG-4 Video Server B. For “Every day”, can set the time duration of every day for the scheduling. C. For “Fixed time”, can set the starting date/ti

MPEG-4 Video Server 3.13. Led Display Control The video server product provides the Led Display Control function, you can enable or disable the led

MPEG-4 Video Server 3.14. Date/Time The video server product can synchronize the date/time with the universally available time server( for example s

MPEG-4 Video Server 3.15. Admin In this page, you can modify the web login account. With this account, you can login to the video server product and

MPEG-4 Video Server 3.16. Upgrade If there is some new firmware available from the supplier of this video server product, you can upgrade the firmwa

MPEG-4 Video Server Figure 3-23: Firmware upgrade status page 36

MPEG-4 Video Server 3.17. Reboot You can restart the video server product manually on this page. All the connected video viewing users will be disco

MPEG-4 Video Server 3.18. Safe Mode If by some abnormal operation, for example, powered off during the critical point of the upgrade procedure, the

MPEG-4 Video Server 3.19. Set to factory default For some reason, for example you forgot the web login password, you may want to set the video serv

MPEG-4 Video Server List of Figures and Tables Figure 2-1: Major connectors in the front panel Figure 2-2: Connect Ethernet cable to a switch/router.

MPEG-4 Video Server 4. Features and specifications 4.1. Features ¾ Translate analog video to digital MPEG4 video for internet transmission. ¾ Easil

MPEG-4 Video Server 4.2. Specifications Models Video Server Power Input DC 12V, 200 mA, provide another output interface for external usage. Networ

MPEG-4 Video Server Audio Built-in audio line in for audio monitoring Audio compression: MPEG2 audio, AMR-NB for 3GPP/ISMA(RTSP streaming) Security

MPEG-4 Video Server 5. Package contents Figure 5-1: The IP camera body Figure 5-2: Power Adaptor Figure 5-3: Quick instal

MPEG-4 Video Server Appendix A. List of Tested NAT/router Devices The followings are the list of tested NAT/router devices that can work with the vi

MPEG-4 Video Server Appendix B. Maximum Allowed Video Users The maximum allowed video users for a single video server product at the same time is depe

MPEG-4 Video Server Appendix C. Performance Information 1. Video Performance Information The video quality is dependent on the video parameter setting

MPEG-4 Video Server Appendix D. Trouble shooting 1. What’s going on when the red led light on the video server product is flashing? A: When the vide

MPEG-4 Video Server A: You can do the recording of the video/audio of the Video server from the CamView software with the CamView software. You can a

MPEG-4 Video Server Appendix E. 3GPP/ISMA operation 3GPP/ISMA is using RTSP protocol for 3G mobile phone to display the video stream from some network

MPEG-4 Video Server 1. Introduction The video server is designed with the “user-friendly” idea deep in mind. It translates the analog video to digital

MPEG-4 Video Server 50Appendix F. Third party and embedded web page integration For third party and embedded web page integration, video server suppo

MPEG-4 Video Server The differences It’s very easy to see the video of the video server product, you only need to key in the ID/Password of the vide

MPEG-4 Video Server 2. Hardware description and quick installation/usage The Video server is designed to be very easy to install and use. First, let’

MPEG-4 Video Server 4. RS485 – for pan/tilt control, Pelco-P and Pelco-D protocols supported. 5. The pin sequences are DI(+),DI(-),DO(+),DO(-),RS4

MPEG-4 Video Server Second, Connect the video server product to the home/office network Please connect the video server product to the home network o